brotherhood sword
- Sakis Herzgil
- Posts: 876
- Joined: Thu May 12, 2005 5:10 pm
- Location: florida
- Contact:
brotherhood sword
would it be a good idea to make the long transparent part of tidus's water sword from poster board if not what could i use to make that part out of any help would be appreciated
- Sakis Herzgil
- Posts: 876
- Joined: Thu May 12, 2005 5:10 pm
- Location: florida
- Contact:
- Dark_Tiger
- Posts: 215
- Joined: Tue Jul 27, 2004 2:27 pm
- Location: Tampa, FL
$120 for a custom blade is actually pretty cheap. Heck, I've seen people drop $150 on mass-produced cheap blades at cons.
Real men sew!
Tigerye Productions: Props, weapons, and much more. I can do that!
"Ebay is the best bet as they are unfeeling there and cold. " - Hemuloki
Tigerye Productions: Props, weapons, and much more. I can do that!
"Ebay is the best bet as they are unfeeling there and cold. " - Hemuloki
-
- Posts: 53
- Joined: Thu Mar 03, 2005 3:28 pm
- Location: singapore
- Sakis Herzgil
- Posts: 876
- Joined: Thu May 12, 2005 5:10 pm
- Location: florida
- Contact:
-
- Posts: 53
- Joined: Thu Mar 03, 2005 3:28 pm
- Location: singapore
blah blah, my previous post was a useless one.
at the art supplies store, acrylic 12 x 18 inches and 3 cm thick costs around $4 and a few cents. it should be okay... but if you need a bigger area of acrylic, they have tons more.
then if you still are making the brotherhood sword, you can heat the acrylic at the sides so blisters'll pop up and voila, you'll have that bubble thing on tidus's sword.
at the art supplies store, acrylic 12 x 18 inches and 3 cm thick costs around $4 and a few cents. it should be okay... but if you need a bigger area of acrylic, they have tons more.
then if you still are making the brotherhood sword, you can heat the acrylic at the sides so blisters'll pop up and voila, you'll have that bubble thing on tidus's sword.
i am PROUD to be an idiot. Are you?
- Sakis Herzgil
- Posts: 876
- Joined: Thu May 12, 2005 5:10 pm
- Location: florida
- Contact:
- Sakis Herzgil
- Posts: 876
- Joined: Thu May 12, 2005 5:10 pm
- Location: florida
- Contact:
- Sakis Herzgil
- Posts: 876
- Joined: Thu May 12, 2005 5:10 pm
- Location: florida
- Contact:
-
- Posts: 53
- Joined: Thu Mar 03, 2005 3:28 pm
- Location: singapore
-
- Posts: 53
- Joined: Thu Mar 03, 2005 3:28 pm
- Location: singapore
-
- Posts: 53
- Joined: Thu Mar 03, 2005 3:28 pm
- Location: singapore
- Sakis Herzgil
- Posts: 876
- Joined: Thu May 12, 2005 5:10 pm
- Location: florida
- Contact: