Need help making Anna's bandana
Need help making Anna's bandana
I 've never made anything for cosplay before as i'm going to my first at waterstones ( I live in the uk) and I want to go as Anna from shaman king. I'm not quite sure on the shape of the bandana whether its a triangle shape or just a big long rectangle. Can anyone help
XD
- Misstress Testament
- Posts: 222
- Joined: Mon Nov 12, 2007 11:32 am
- Location: So Cal
- Contact:
Go with a long rectangle and little wider in the middle to cover your head.
Taking Commissions .I specialize in kimonos, Bleach, and I am expanding my repetoire. I have done Trench Coats. I make quaility pieces that can be used everyday Please leave me a messages we can talk about what you need. SanguineSpinner.etsy.com for the quick and easy kimono purchase. www.racheldesade.deviantart.com to see some of my work.
I've made that bandanna before. I used a rectangle of broadcloth, folded crosswise a bit off-center from half (instead of making the edges meet exactly, they were about 3 inches off from each other). Then I found an unwanted baseball cap (red is nice but any color will do) and took off the bill by undoing the stitching there. Next, I centered the front edge of the cap (where the bill was) on the folded edge of the red fabric. Pin the fabric with about 1 inch allowance under the edge of the cap and stitch in place for 6-8 inches or so (pretty much the entire length of where the bill was). When you're done, it should look as though the fabric was hanging down from the cap like a fake fringe/bangs. When you flip the fabric up and over the cap, all the stitching and the cap will be hidden. My "knot" is actually a separate tube of fabric tied around the bandanna with the ends tucked. This is easier and takes less fabric than actually trying to tie the big rectangle.
The cap is adjustable and helps the bandanna stay on your head a lot better because the weight of the big "knot" tends to pull the bandanna off your head if it's just fabric (which slides). Oh, here's a picture: http://www.cosplaylab.com/cosplayers/co ... meid=31848
Have fun!
The cap is adjustable and helps the bandanna stay on your head a lot better because the weight of the big "knot" tends to pull the bandanna off your head if it's just fabric (which slides). Oh, here's a picture: http://www.cosplaylab.com/cosplayers/co ... meid=31848
Have fun!