Page 1 of 1

How to make a Kunai

Posted: Wed Apr 04, 2012 3:49 pm
by rheck
This is the write up I did for the large (aprox. 16 inches long) kunai prop I made recently: http://heck.cosplayoverload.com/buildin ... on-part-1/

A bunch of pictures of the finished kunai: http://heck.cosplayoverload.com/portfolio/kunai-prop/

Re: How to make a Kunai

Posted: Sun Dec 25, 2022 10:37 pm
by Wherrigh
Get two square pieces of paper, preferably black construction paper.
Holding the smaller square, fold one geometry dash lite corner to the opposite side.
Fold a crease halfway through the paper.
Unfold the paper.
Take one of the short sides of the triangle (not the long one) and fold the edge to the middle.