EPS foam Alien Xenomorph head piece

Looking for cosplay ideas? Have an idea but need better pictures? Try shouting here!
Post Reply
User avatar
VFXFoam_Rob
Posts: 2
Joined: Mon Jun 06, 2016 6:52 am
Contact:

EPS foam Alien Xenomorph head piece

Post by VFXFoam_Rob » Mon Jun 06, 2016 9:32 am

Hey everyone! I wanted to post up a few pictures of a project we're working on at VFX Foam, a new company in Washington state that creates EPS foam cosplay and props.

There's a young kid that is about 45" tall that was looking for a very realistic Xenomorph head piece from the movie Aliens. We found out he's a huge fan of the movies and decided we would make him a head piece made out of EPS foam and using some state of the art techniques. What we did was take a model Xenomorph, 3D scanned the head, and then pulled into into 3ds Max to clean up the 3D model. From there, we took a big block of foam and cut the head piece out in 2 different halves that we will bond together using a polystyrene foam specific adhesive. Once it's put together, we'll prep is for paint, primer, paint and airbrush, and then give it a layer of clear coat. All of this will be cut on an automated 4-axis CNC foam router.

Here's a few pictures. I'll update this post as we move forward with the project.

3D Scanning of the Xenomorph action figure
Image

3D model and comparison of the Xenomorph action figure
Image

First block of foam being cut on the 4-axis CNC foam router
Image

Both halves of the Xenomorph head piece put together
Image

Here's something else we're doing that's different. We can add a hard coat to the foam to make the props VERY durable and last a very long time. This is a great option for people that need something that will last or possibly resell the cosplay in the future.

Image

Video of us taking a hammer to the hard coated head piece. This might not be the most scientific or most official method but this will give you an idea of how impact resistant the coating is on EPS foam.

https://www.youtube.com/watch?v=YZujjfxH7nE

ruesoferick
Posts: 6
Joined: Wed Aug 10, 2016 1:19 pm

Re: EPS foam Alien Xenomorph head piece

Post by ruesoferick » Tue Aug 16, 2016 9:53 am

awesome work its definitely one of the most scary monsters! :twisted:

Post Reply