Titanfall Oger Titan WIP

Need help with sewing techniques, or making a 10 ft sword? Seek help from other cosplayers here!
Post Reply
racm32
Posts: 4
Joined: Tue Apr 07, 2015 12:42 pm

Titanfall Oger Titan WIP

Post by racm32 » Tue Apr 07, 2015 1:03 pm

I am attempting my largest and most elaborate costume yet. I wish to make a IMC Oger Costume from Titanfall:

Image

I started by building a skeleton of the torso:

Image

Image

Next I filled in the skeleton with expanding foam (not quite done with this step):

Image

Image

Image

Once done with this I will carve the foam to the shape of the torso. After that I plan to coat the foam in Shell Shock SLOW Brushable Liquid Plastic Casting Resin which should protect the foam from disintegrating under paint and glue. Once dry I plan to make the armor details out of EVA foam.

I have run into a small problem. The rings for the arms are a tad to close together to get my arms up and through. My fix idea is to cut the bottom of the rings away and make them detachable. Here is the part in question:
Image

All feedback and suggestions welcome.

racm32
Posts: 4
Joined: Tue Apr 07, 2015 12:42 pm

How to cut this?

Post by racm32 » Sun Apr 12, 2015 8:33 am

I need to cut the bottom out of this metal loop without destroying it, thoughts?

Image

racm32
Posts: 4
Joined: Tue Apr 07, 2015 12:42 pm

Re: update

Post by racm32 » Sun Apr 12, 2015 2:21 pm

Image


Image


Image


Image

User avatar
gregkhion
Posts: 1
Joined: Wed Apr 15, 2015 2:29 pm
Contact:

Re: Titanfall Oger Titan WIP

Post by gregkhion » Wed Apr 15, 2015 3:05 pm

That's a great choice dude i think it will turn out good if its finish.
A mind all logic is like a automatic knife all blade. It makes the hand bleed that uses it.

racm32
Posts: 4
Joined: Tue Apr 07, 2015 12:42 pm

Re: Titanfall Oger Titan WIP [update photos]

Post by racm32 » Tue Aug 11, 2015 9:40 am

Lower body constructed and primed. just needs details added:

Image

Image

Image

Image

Post Reply