i need help making keyblade. Problem is I have no tools

Need help with sewing techniques, or making a 10 ft sword? Seek help from other cosplayers here!
kingdomheartskrazy
Posts: 14
Joined: Mon Sep 11, 2006 1:11 am
Location: Australia, Sydney
Contact:

i need help making keyblade. Problem is I have no tools

Postby kingdomheartskrazy » Mon Sep 11, 2006 7:37 pm

hi
Kingdom Hearts rules.....never forget that

kingdomheartskrazy
Posts: 14
Joined: Mon Sep 11, 2006 1:11 am
Location: Australia, Sydney
Contact:

Postby kingdomheartskrazy » Mon Sep 11, 2006 7:39 pm

I was thinking of cuting the shape out then paper machae it till it takes its shape. Though I want it durable so I dont know if it will work
Kingdom Hearts rules.....never forget that

kingdomheartskrazy
Posts: 14
Joined: Mon Sep 11, 2006 1:11 am
Location: Australia, Sydney
Contact:

Postby kingdomheartskrazy » Mon Sep 11, 2006 7:40 pm

.....
Kingdom Hearts rules.....never forget that

kingdomheartskrazy
Posts: 14
Joined: Mon Sep 11, 2006 1:11 am
Location: Australia, Sydney
Contact:

Postby kingdomheartskrazy » Mon Sep 11, 2006 7:43 pm

IS ANYONE THERE?
Kingdom Hearts rules.....never forget that

zaitenaiji
Posts: 16
Joined: Tue Jun 27, 2006 8:35 pm
Location: Southern California
Contact:

Postby zaitenaiji » Tue Sep 12, 2006 8:30 pm

I don't know other people made theirs, but I'm planning on making mine out of a PVC pipe and wood.

And try and be patient for answers here. This part of the forums doesn't move very fast and it takes a while for people to answer. Mine hasn't even gotten commented on yet.

User avatar
gravigurl
Posts: 165
Joined: Sat Aug 14, 2004 7:24 am
Location: maine

Postby gravigurl » Wed Sep 13, 2006 8:25 am

wood and pvc is always good or even insulation foam core. it's cheap (about 8-11 bucks a 8foot sheet) and very durable you can cut and carve it to look right then paint it..just be sure to seal it before heading out it can chip.
I am open for prop Commissions from the following series: Final Fantasy, Kingdom Hearts, Sailor Moon and cardcaptors Sakura.

Valkyrie Aesir
Posts: 2
Joined: Tue Nov 13, 2012 11:26 pm

Re: i need help making keyblade. Problem is I have no tools

Postby Valkyrie Aesir » Tue Nov 13, 2012 11:37 pm

What you can do is take a pvc pipe, triple expanding foam, hot glue gun, a carpet cutter and paper mache.

1. Draw out the pattern on cardboard and cut it out.
2. Glue it to the PVC pipe with a hot glue gun.
3. Cover it in triple expanding foam (Such as Great Stuff from home depot) No matter what brand you buy it will take at least 3 hours to cure.
4. Carve it and sand it if you desire to get your shape using the cardboard cut out as a guide. (The Cardboard acts as support as well)
5. Cover it with painters tape
6. Cover it with paper mache
7. cover with paper mache clay and sand.

Now all you need to do is paint it. I've experimented with this before and it works wonders.

mariasam
Posts: 1
Joined: Thu Aug 15, 2013 10:14 pm

Re: i need help making keyblade. Problem is I have no tools

Postby mariasam » Thu Aug 15, 2013 10:32 pm

I have made everything but the white top she is wearing but I'm not sure how to go about making it does anyone have any idea how i could do it? :lol: :P


Return to “Costume / Prop Construction Help”

Who is online

Users browsing this forum: No registered users and 3 guests